Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Car Racks

Yakima 1 1/4-Inch Hitch Adapter
$30.00
Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.
Yakima BaseClip
$63.00
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima BlockHead
$39.00
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
Yakima Boatloader
$79.00
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inches\u001D from end of bar
Yakima Chain Straps
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima CrossBars
$105.00
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima Fairing
$79.00
Besides improving your vehicle's looks, the Yakima Fairing reduces wind noise and the amount of debris that strikes your bikes. Its sleek design fits most windshield angles and curvatures and is compatible with every Yakima tower. Plus, it's easy to install and a great place for your favorite bike stickers!
Yakima FrontLoader
$209.00
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
Yakima HalfBack 3
$219.00
A strap rack that hits the sweet spot where functionality, durability, simplicity and good looks come together, the HalfBack 3 is designed for riders who like to grab their bikes and go. Install is simple, loading and unloading is a piece of cake, bikes ride securely, and a built-in bottle opener opens bottles. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Yakima signature bottle opener lets you enjoy a post-ride cold one - Number of Bikes: 3 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 29.00” x H 22.00”
Yakima HandCuff
$49.00
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Yakima Keelover
$119.00
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but you'll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
Yakima Landing Pad
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima Q Clip
$35.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima Q-Towers (4-pack)
$195.00
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima RailBar
$229.00
The Yakima RailBar is the premium crossbar choice for vehicles with factory-equipped raised siderails. This crossbar with integrated and easy-to-use towers has no bar overhang, so your vehicle will have a clean, modern aesthetic, looking like it came from the factory with the RailBars already installed. The sleek low-profile shape of the crossbar and its seamless integration to your vehicle’s siderails maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all of Yakima's mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two RailBars. Consult Yakima's Fit My Vehicle Guide (www.yakima.com) to determine which RailBar sizes are required for your specific vehicle. Product details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to you vehicle with our SKS system (sold separately)
Yakima RailGrab (4-pack)
$195.00
Yakima's RailGrab Towers are the rock-solid foundation for your Yakima roof rack (for vehicles with factory roof racks). The RailGrab Towers attach to your factory crossbars and they have die-cast components for a sturdy hold.
Yakima RailGrab Kit
$229.00
Stronger and more versatile than factory racks, this rail grabber installs easily by clamping onto flush or raised side rails. - Low profile provides a sleek, integrated look for your roof rack - Includes onboard tool for easy on/off - Lockable with SKS Locks (sold separately) - Kit includes four RailGrab towers and two 58-inch crossbars
Yakima Roundbar SL Adapter
$30.00
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima SKS Lock Cores (2-Pack)
$40.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima Showboat 66
$219.00
The ShowBoat 66 load-assist roller makes getting even the biggest boats a sinch. Roller slides out over the rear of the vehicle for easy access and vehicle protection during loading and unloading. - Adjusts from side to side for loading multiple kayaks. - Fits Yakima round, square, factory and aerodynamic crossbars - Padded to protect your kayak or canoe during loading and transport - Works with a variety of kayak and canoe mounts - Corrosion-resistant stainless steel and brass hardware - Includes two 66" Yakima crossbars 24" max extension with up to an 80 lb boat
Yakima Windshield
$125.00
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool
Thule AeroBlade Edge (Raised Rail)
$249.95
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Thule Squarebar 150
$119.95
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 150cm / 60 in
Saris Superclamp EX, 2 Bike
$499.99
With its robust construction, eye-catching style and compact design that carries both bikes on a single bar, the SuperClamp is your bike’s new BFF. This lightweight – yet mighty – platform hitch rack is ready to hit the road at a moment’s notice. Whether you’re hauling eBikes, beefy mountain bikes, your prized TT rig, or an assortment of bicycles, the SuperClamp’s dual shepherd’s hooks promise all bikes a truly secure ride without touching the bike’s frame. And thanks to the SuperClamp’s tilting feature, no more unloading bikes to let the dog out of the back. Simply tilt down and release the hounds. Top it all off with integrated locks, a built-in bottle opener and head-turning reflectors, the SuperClamp 2-bike is proof that you can have your cake and eat it too. - Fastest loading bike rack around thanks to the dual wheel-clamping hooks (bonus: no frame contact). - Lightweight, yet mighty! Weighs only 35 lb, and is rugged enough to carry 2 bikes, up to 60 lb each. - Features integrated locks and reflectors for extra security and visibility, day and night. - Open Sesame! Tilting feature allows hatch access, even when fully loaded, and folds up when not in use. - Sleek and compact design holds 2 bikes on a single bar.
Kuat 1.25-inch to 2-inch Adapter
$15.00
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat Dirtbag 15
$19.00
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Kuat Dirtbag Phat 15
$29.00
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Kuat Hi-Lo
$49.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
Kuat Highline
$219.00
No hitch? No roof bars? Kuat Highline is the answer. Easily mount Kuat’s Highline to almost any vehicle. Perfectly at home hauling your machine to the local group ride or your families stable of bikes to the greenway. Rugged construction, smart user-friendly design, and sleek aesthetics make the Highline trunk rack a staple in any cyclist’s garage. The Highline has 2 or 3 bike options available and is constructed with lightweight and durable aluminum. Intuitive tray pivot design makes it a snap to prep for loading. Your bikes will be carried with the Highline’s exclusively designed cradles featuring integrated straps and anti-sway to keep your bicycle in place. An industry-first protective film is included with each Highline because we like your vehicle’s paint too.
Kuat NV 2.0 Add-On
$489.99
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes
Page 1 of 8 Next page