Parts & Accessories

Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.

The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but you'll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty

Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

Long gone are the days when your vehicle's spare tire gets in the way of an epic bike trip. This handy little extension adds 7.25 inches to a 2-inch hitch receiver, giving you the clearance to attach just about any 2-inch bike rack. We're looking at you Broncos, Wranglers, and G-wagons. - Extends your 2" hitch receiver by 7 1/4" - Secures to any 2" hitch receiver using a threaded pin - Heavy-duty steel construction - Provides clearance to most spare tires; please measure your spare tire before hand - Compatible with the following Yakima Hitch Racks: Dr. Tray, OnRamp, HoldUp EVO, HoldUp, TwoTimer, HangOver 4, FullSwing, LongHaul, RoadTrip, EXO System Product Specs: - Weight: 8.63 lbs. - Dimensions: L 12.75 in x W 3.00 in x H 3.00 in - Limited Lifetime Warranty

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.