Tools

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

REAR SHOCK SERVICE KIT BASIC- MONARCH WITH AUTOSAG SPECIALIZED B1

Park Tool's CTP-4K includes four replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap. Works with the CT-4.3, CT-4.2, CT-4, and CT-11

Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded

High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away

Park Tool's versatile and durable 8oz Shop Hammer is a perfectly balanced striking instrument built for a wide variety of shop uses. - Forged steel, precision machined striking face - Non marring, replaceable composite tip - Fiberglass shaft with soft touch grip - 8oz (225g) Head - Length: 12" (30.5cm) - Steel striking face: 1" (25mm) diameter - Plastic face: 1-1/4" (32mm) diameter - Replacement tip: Part #293-8

Replacement SWAT MTB Tool. - Made with hardened CRV steel bits with anti-rust coating and forged alloy frame. - Includes slotted screwdriver, 3, 4, 5, 6, and 8mm Allen keys, and T25 Torx. - Please note that this does not include a storage cradle to attach to a frame or cage.

A precision CNC-machined aluminum tool for the installation and removal of select components with 16-notch tool fittings, including bottom brackets, center lock disc brakes, and e-bike motor lockrings. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including: - Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups - Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others - Center lock disc brake rotor lockrings - Bafang BBSH, BBS02 mid-drive motor lockrings - 3/8" drive fitting

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

Take the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. Features an oversized syringe body with easy-to-read gauge for precise application of sealant. - Syringe capacity: 3.5 fl. oz. (100 cc) - Tube dimensions: 120mm (4.75"") long x 3.5mm (0.14"") diameter NOTE: some tubeless valve stems feature an opening that is smaller than the tube of the TSI-1. In these cases, the bead must be removed from the rim in order to remove sealant from the tire.

Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.

Precision CNC machined dual-sided aluminum tool for the installation and removal of 12- and 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - Fits Enduro T47: 16-notch 52.2mm OD cup - Fits Enduro PF30: 16-notch 52.2mm OD cup - Fits Chris King ThreadFit T47: 12-notch 50.4mm OD cup - Fits Chris King ThreadFit 30: 12-notch 50.4mm OD cup

- Compact size and low weight perfect for the tool box. - Two-sided, heat-treated tool steel head with replaceable plastic face on one side. - Dice Grip handle provides comfort and control while absorbing vibration. The Hammer is a professional quality, efficient, mechanic's hammer perfect for the tool box or shop, and ready to tackle all your bicycle hammering needs. The Hammer features two-sided, heat treated tool steel head with a replaceable plastic face on one side. It features a compact 10.75" (275mm) length, 550g weight, and Dice Grip handle for comfort, control, and vibration absorption. The Hammer head diameter is 1 inch (25.4mm). The soft face tapers down to about 24mm.

The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. - T10 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

Combining style, technology and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features. The ergonomic side-plates are machined from lightweight aluminum, anodized black and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Hex 3/4/5/6mm - T25 - Phillips - 82g

High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

Pre-calibrated, torsion-beam-style torque wrench. Machined aluminum construction with removable handle and integrated magnet to hold tool bits in place. 2Nm – 10Nm torque capacity. No preset necessary-simply twist until marker lines up with desired torque setting. Includes soft shell carrying case with storage cutouts. - Weight: 190g Tool Bits - Hex 2, 2.5, 3, 4, 5, 6mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head

Many new bikes do not include pedals. Park Tool's DP-2 Threaded Dummy Pedal easily threads into the drive side to take the place of a pedal when making adjustments during the assembly of these bikes. Use of the DP-2 is much quicker than using a pedal wrench to install and remove an actual pedal during assembly.

Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures

High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm

50 HOUR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)

RockShox 30mm Seal Kit

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

The basics of what you need to perform maintenance on TRP and Tektro hydraulic disc brakes. Includes the following: - 1 Syringe - 1 Plastic tubing for syringe/caliper - 1 Plastic tubing for lever/overflow - 1 M5 Silver bleed fitting - 2 M6 Silver bleed fittings - 1 M7 Black bleed fitting

Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid.

The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set which features a pair of our innovative tools that discretely and securely hide in the ends of a handlebar: the Tubeless Insert Kit and the Tool Insert Kit. The Tubeless Insert Kit is constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high-quality tubeless plugs that can also be stored inside its body. The Tool Insert Kit is constructed from lightweight, durable machined aluminum and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with 11 different tool bits ideal for today’s modern bikes. The Kits also doubles as bar-end plugs and come with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings. Tool Insert - Machined Aluminum Bar plug tool kit - Hex bits: 2,3,4,5,6,8, 10mm - Phillips bit - T10,T25,T30 - Fits all standard MTB handlebars Tubeless insert - Machined aluminum bar plug tubeless repair kit - 5 tire plugs - Combined reamer and insertion tool - Fits all standard MTB handlebars

Precision brake bleeding tools and adaptor kits for Magura brake systems.

Bicycle tool set with ratchet, bit, sockets and a bit hand holder in a compact space. Perfect as a universal companion with a variety of screwdriving challenges. High-quality bit hand-holder with Kraftform Plus handle for comfortably ergonomic work, which avoids blisters and calluses. Bit ratchet for quick work when bolting by machine or when conventional hand tool is not possible due to lack of space. Fast switching from left to right and vice versa via the switching lever. Quick turning (by thumb) over the grooved ratchet head. Simple operation, even with just one hand. - Compact 39-piece screwdriving tool set for bicycle applications, also for mobile use - Hard grip zones for high working speed, soft grip zones for high torque transmission - Practical range for DIY assembly work and repairs - Tools for the most popular screw profiles on road bikes, mountain bikes and e-bikes - Robust, surface-friendly, compact low weight textile pouch - "Take-it-easy" tool finder: color coding by size

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). - Carefully selected combination of Chrome Vanadium and S-2 tool steels - 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or over-sized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions - Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage

Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces.

Park's Shop Hammer is designed specifically for use on bicycles. It features a unique dual-sided head with both steel and plastic striking surfaces, a reinforced fiberglass shaft and a soft, comfortable molded handle. The HMR-4 proves that sometimes a hammer is the best tool for the job.

Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

- Heavy-duty device that cleans chain in seconds - The kit includes a 75 ml bottle of Drivetrain Cleaner that can be either sprayed over the drivetrain or poured into the top reservoir - Liquid release button ensures the application of the cleaner is quick and easily controlled. - Abrasive cleaning teeth and rotating brush wheels which have 120 contact points cover every part of each chain link for a deep and thorough clean - Excess dirty fluid drops into a second lower reservoir so it’s kept away from the clean chain

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

- Lockring tool, freewheel turner (chain whip, 1/2" x 1/8"), and 15mm pedal wrench. - Perfect tool for fixed-gear bikes. - Cr-Mo steel.

Lezyne's Classic Pedal Rod is designed for heavy-duty use. Featuring two 15mm wrench openings with optimally positioned offsets, this wrench will loosen any pedal from its crank. The handle is made of varnished wood for strength and stylish good looks and there's an included bottle opener. Hang this beauty on your wall for all future pedal changes.

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

Extra strong, fiber reinforced Composite Matrix tire levers engineered for use with tubeless bicycle tires. They feature an aggressive tire bead hook and plenty of leverage to mount or remove difficult tubeless tires, yet designed to not damage carbon rims when used properly. The built-in spoke hooks aid in tire removal and integrate neatly for compact storage—along with an included neoprene cover. These tire levers are optimized for convenient trail or roadside use, or everyday use by bike shops and professional bike mechanics. Available in black or easy-to-find yellow, the Tubeless Power Lever XL is the best tubeless tire companion for mountain bikes, road bikes, gravel bikes, and e-bikes. - Strong, fiber reinforced Composite Matrix levers. - Tubeless optimized XL length with spoke hook. - Extra-long 150mm length for increased leverage. - Comfortable, wide handle with integrated spoke hook that locks levers together.

- Three brush heads featuring tough nylon bristles and an integral scraper for mud de-clogging - Ideal for chain, cassette and sprockets - 10-speed compatible

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

Pedal Wrench 15mm off-set design w/ergonomic handle